RPEC
MODEL: RPEC
Pilot-operated, balanced piston relief valve
SERIES 1/ CAPACITY:95 L/min./ CAVITY;T-10A
Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs.flow, they are smooth and quiet, and are moderately fast.
TECHNICAL DATA NOTE:DATA MAY VARY BY CONEIGURATION,SEE CONEIGURATION SECTION
Maximum Operating Pressure | 350bar |
Factory Pressure Settings Establishedat | 15L/min. |
Maximum Valve Leakage at110SUS(24cSt) | 30cc/min.@70bar |
Response Time-Typical | 10ms |
Adjustment-No.of CW Turnsf rom Min.to Max.setting | 5 |
Locknut Hex Size | 15mm |
Locknut Torque | 9-10Nm |
Sealkit-Cartridge | Buna:990010007 |
Sealkit-Cartridge | EPDM:990010014 |
Sealkit-Cartridge | Polyurethane:990010002 |
Sealkit-Cartridge | Viton:990010006 |
NOTES For Series 1 cartridges configured with an O control (panel mount handknob), a.75 in.(19 mm) diameter hole is required in the panel.
CONFIGURATION OPTIONS Model Code Example: RPGELAN
CONTROL （L) |
| SEAL MATERIAL (N) | MATERIAL/COATING |
(L) Standard Screw Adjustment | (A) 100-3000 psi(7-210 bar), | (N) Buna-N | Standard Material/Coating |
(C) Tamper Resistant -Factory Set | (W) 150-4500 psi(10,5-315 bar), | (E) EPDM | AP Stainless Steel, Passivated |
(K) Handknob | (B) 50- 1500 psi(3,5- 105 bar), | (V) Viton | LH Mild Steel, Zinc-Nickel |
(O) Handknob with Panel Mount | (C) 150-6000 psi(10,5-420 bar), | ||
(W) Hex Wrench Adjustment | (N) 60-800 psi(4-55 bar), | ||
(Y) Tri-Grip Handknob | (Q) 60-400 psi(4-28 bar), | ||
Deliver, Shipping And Serving
Deliver time: in stock/10-30 Day
Shipping: FOB NINGBO,FOB SHANGHAI
Serving: 24 hours on line