RPGE
MODEL: RPGE
Fast-acting, pilot-operated, balanced piston relief valve
SERIES 2/ CAPACITY;200 L/min./ CAVITY;T-3A
Fast-acting,pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulics components from pressure transients. Fast opening and closing is gained at the expense of smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank(port 2), throttling flow to limit the pressure rise. These valves have low pressure rise vs.flow and are very fast.
TECHNICAL DATA NOTE:DATA MAY VARY BY CONEIGURATION,SEE CONEIGURATION SECTION
Factory Pressure Settings Established at | 15L/min. |
Maximum Operating Pressure | 350bar |
Maximum Valve Leakage at 110SUS(24cSt) | 50cc/min.@70bar |
Response Time-Typical | 2ms |
Adjustment-No.of CW Turns from Min.to Max.seting | 5 |
Locknut Hex Size | 15mm |
Locknut Torque | 9-10Nm |
Sealkit-Cartridge | Buna:990203007 |
Sealkit-Cartridge | EPDM:990203014 |
Sealkit-Cartridge | Polyurethane:990003002 |
Sealkit-Cartridge | Viton:990203006 |
NOTES For Series 1 cartridges configured with an O control (panel mount handknob), a.75 in.(19 mm) diameter hole is required in the panel.
CONFIGURATION OPTIONS Model Code Example: RPGELAN
|
|
| |
(L) Standard Screw Adjustment | (A) 100-3000 psi(7-210 bar), | (N) Buna-N | Standard Material/Coating |
(C) Tamper Resistant -Factory Set | (B) 50- 1500 psi(3,5- 105 bar), | (E) EPDM | AP Stainless Steel, Passivated |
(K) Handknob | (C) 150-6000 psi(10,5-420 bar), | (V) Viton | LH Mild Steel, Zinc-Nickel |
(O) Handknob with Panel Mount | (D) 25-800 psi(1,7-55 bar), | ||
(E) 25-400 psi(1,7-28 bar), | |||
(W) 150-4500 psi(10,5-315 bar), |
For more models, please contact us via email
Deliver, Shipping And Serving
Deliver time: in stock/10-30 Day
Shipping: FOB NINGBO,FOB SHANGHAI
Serving: 24 hours on line